![]() ![]() Nearly all engines use coolants with similar base fluids: a 50/50 mix of ethylene glycol and water. The addition of glycol slightly reduces the heat transfer of the water, but in most climates and applications, freeze protection is critical. While water provides the best heat transfer, glycol is also used in engine coolants to provide freeze protection. Overheating could result in accelerated deterioration of the oil and the engine itself. This heat removed by the coolant provides a balance in the removal of engine heat that is critical in ensuring that the engine operates properly. The remaining one-third of heat energy produced is taken away by the engine coolant. An additional one-third is removed as heat energy by the exhaust system. In a heavy-duty diesel engine, only one-third of the total energy produced works to propel the vehicle forward. It plays a critical role in sustaining engine heat balance by removing heat. View our range of premium antifreeze and coolant, or contact our team for more information.Coolant (or antifreeze) protects your engine from freezing while defending components against corrosion. Replace the cap: Screw the cap back on until you hear a click.Īntifreeze is a key fluid for every engine.Fill with coolant: When filling, slowly top-up to the maximum marker.Insert a funnel: Since coolant is toxic to humans and animals, you should use a funnel to avoid spills when topping up the reservoir. ![]() Unscrew the reservoir cap: When unscrewing, always cover the cap with a cloth, just in case pressurised water escapes from the coolant reservoir.Mix the coolant: If you are not using pre-mixed coolant, mix the correct antifreeze with distilled water as per the manufacturer’s instructions – 50-50 is a common measure, with 70-30 for extremely cold climates.Above maximum, and you should immediately siphon out the excess. Check the coolant level: The coolant reservoir has minimum and maximum markers – the coolant level should be in between these lines. If it’s below minimum, top it up.Find the coolant reservoir: The location should be in your car handbook, as well as information on the correct type of antifreeze or coolant for your vehicle.Before you start, park on a level surface and wait for a few hours until the engine is fully cold – if it’s hot, pressurised water can dangerously erupt from the reservoir cap when it’s unscrewed. In this case, you should top up your coolant as soon as possible to avoid engine damage. Sometimes, coolant levels can be low due to too little coolant being put into the reservoir. Simply topping up your coolant should never be used as a stop-gap remedy to leaks, so if your coolant level drops, always visit a mechanic to get it repaired. Symptoms of this can be a rising temperature gauge, a sweet odour (the smell of antifreeze), problems with your car’s heater or increased fuel consumption. If your car’s coolant level is dropping, it is almost always due to leaks in the cooling system – the hoses, radiator or radiator cap, for example. Why is my car’s coolant level low? Leaks in the cooling system You shouldn’t drive with a low level of engine coolant it keeps your engine from overheating in hot weather and freezing up in sub-zero temperatures. But for it to keep safeguarding components and performance, there needs to be enough of it in the cooling system. Corporate social responsibility – our commitments.Our commitment to sustainable motorsport. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |